 
|
Home > Polytron Power Supplies > Polytron PLS(H)30 Series, DC-DC Converters, 30 AMP, 1.30" x 0.53" x 0.37", PLS30-12T: 1.30" x 0.53" x 0.31", PLH30-05T: 2.00" x 0.50" x 0.37", PLH30-1
Polytron PLS(H)30 Series, DC-DC Converters, 30 AMP, 1.30" x 0.53" x 0.37", PLS30-12T: 1.30" x 0.53" x 0.31", PLH30-05T: 2.00" x 0.50" x 0.37", PLH30-1
|
|
Price (Each): Call or e-mail for quotes or to order.
Available to Order
Item Number: PLS(H)30
|
Small, low-profile DC-DC converters
Our PLS(H)30 series of DC-DC converters features SMD and SIP packages, monotonic start-up into pre-biased output and a variety of input and output ranges, depending on the model. This series also features high efficiency up to 93% at 5 Vin and 3.3 Vin load, and meets all UL60950-1, EN60950-1 and IEC60950-1 safety standards.
PLS(H)30 Series Specification Sheet PDF
Daburn Part
Number |
Input Range
(Vdc) |
Output Voltage
Vdc |
Output Current Load
A
Min. |
Output Current Load
A
Max. |
ON/OFF Logic |
Efficiency
%
(5.0Vin, 3.3Vdc @ 6A)
|
|
|
PLS30-05T
|
4.5 - 5.5
Vin, Min. = Vout(set) + 1.5Vc
|
0.8 ~ 3.63 |
0 |
30 |
negative |
93 |
SMD |
|
PLS30-05T
|
0.8 ~ 3.63 |
0 |
30 |
positive |
93 |
SIP |
|
PLH30-12T
|
6.0 - 14
Vin, Min. = Vout(set) + 2.4V
|
0.8 ≤ Vout ≤ 2.75 |
0 |
30 |
negative |
92 |
SMD
|
|
PLH30-12T
|
2.75 < Vout ≤ 3.63 |
0 |
30 |
positive |
92 |
SMD
|
|
PLH30-12
|
0.8 ≤ Vout ≤ 2.75 |
0 |
30 |
negative |
92 |
SIP
|
|
PLH30-12T
|
2.75 < Vout ≤ 3.63 |
0 |
30 |
positive |
92 |
SIP
|
Input and Output Specifications:
INPUT
- Operating input voltage range: Vin Min. = Vout (set) + 2.4 Vdc
- 4.5 - 5.5 Vdc: Vin (nom) = 5 Vdc
- 6 - 14 Vdc: Vin (nom) = 12 Vdc
- Input filter: C filter
- Input reflected ripple current: 100 mAp-p
- 5-20 MHz, 1µH source impedance
- Sequencing delay time: 10 mS, min.
- Tracking accuracy: Vin (min.) - Vin (max.), lo (min.) - lo (max.), VSEQ < Vout
- 100 mV: Power-up (2V/mS)
- 200 mV: Power-down (1V/mS)
- Start-up voltage: 4.4 Vdc
- Shut-down voltage: 4.3 Vdc
- Remote On/Off
- Negative logic, standard
- 1 in = 200µA, max.
- ON = Open or -0.3V < Vr < 1.2V
- 1 in = 3.3µA, max.
- OFF = 3V < Vr < Vin (max.)
- Positive logic, option
- 1 in = 200µA, max.
- ON = Open or 3V < Vr < Vin (max.)
- 1 in = 3.3µA, max.
- Rise time: 10 mS max., 10 to 90% Vout (set)
- Remote sense range: 0.5V
- Active load share
- 10% lo: Accuracy (option)
- 5 pcs., Max.: Number of unites in parallel
- Turn-on delay time
- Case 1: 2.5 ms
- Case 2: 2.5 ms
OUTPUT
- Output current
- PLS(H)30-05T: 30A max.
- PLS30-12T
- 30A max: 0.8 ≤ Vout ≤ 2.75 Vdc
- 20A max: 2.75 ≤ Vout ≤ 3.63 Vdc
- PLH30-12T:
- 30A max: 0.8 ≤ Vout ≤ 2.75 Vdc
- 20A max: 2.75 ≤ Vout ≤ 5.5 Vdc
- Voltage accuracy: 1.5%, Vout (set)
- Vin = Vin (min) - Vin (max) at full load
- Line regulation:
- Load regulation: No load to full load
- Minimum load: 0%
- Output current limit: 150%
- Voltage adjustability
- PLS30-05T: 0.8 - 3.63 Vdc
- PLH30-05T: 0.8 - 3.63 Vdc
- PLS30-12T: 0.8 - 3.63 Vdc
- PLH30-12T: 0.8 - 5.5 Vdc
- Ripple and noise: Measured by 20MHz bandwidth * 75 mVp-p, max.
- Temperature coefficient: ±0.5%/°C
- Output voltage overshoot-startup
- 3 Vout (set), max.
- Vin = Vin (min.) - Vin (max.); F.L.
- Dynamic load response
- Note 2
- 350 mV: ∆lo/∆t = 5A/µs, Vin (nom), peak deviation
- 25 µs: Load change step (50 to 100% or 100 to 50% of lo(max.)), setting time (Vout < 10% peak deviation)
- Note 3
- 250 mV: ∆lo/∆t = 5A/µs, Vin (nom), peak deviation
- 40 µs: Load change step (50 to 100% or 100 to 50% of lo(max.)), setting time (Vout < 10% peak deviation)
- External load capacitance
- 2000µF, ESR ≥ 1mΩ
- 10000µF, ESR ≥ 10mΩ
- Short circuit protection: Hiccup, automatics recovery
More Specifications:
GENERAL
- Isolation voltage: None
- Switching frequency: 300 kHz, ±13%
- Design meet safety standard: UL60950-1, EN60950-1, IEC60950-1
ENVIRONMENTAL
- Operating ambient temperature: -40 to 85°C
- Storage temperature range: -55 to 125°C
- Over temperature protection: 125°C
- Thermal shock: MIL-STD-810F
- Vibration: MIL-STD-810F
- Relative humidity
- Non-condensing: 5 to 95% RH
- Lead-free reflow solder process: IPC J STD-020D
- Moisture sensitivity level (MSL): Level 2a
PHYSICAL
- Dimensions
- PLS30-05T: 1.30 x 0.53 x 0.37 inches (33.0 x 13.5 x 9.4 mm)
- PLS30-12T: 1.30 x 0.53 x 0.31 inches (33.0 x 13.5 x 7.8 mm)
- PLH30-05T: 2.00 x 0.50 x 0.37 inches (50.8 x 12.7 x 9.4 mm)
- PLH30-12T: 2.00 x 0.50 x 0.31 inches (50.8 x 12.7 x 7.8 mm)
- Weight
- SMD: 6.0 g (0.21 oz)
- SIP: 7.0 g (0.25 oz)
- MTBF: 1.258 x 106 hours, MIL-HDBK-217F
|
Extra small SMD or DIP package
With available 3000 Vdc input to output isolation, our 1 watt 4:1 wide input DSB(H)1 series DC-DC converter features no minimum load requirement, continuous short circuit protection and an extra small SMD or DIP package.
|
Extra wide input range (4.5-13.2V, 9-18V, 18-36V, 36-75V), wide temperature range (-40 to +105º C) and high efficiency up to 86 percent. Housed in a SIP 8 package, devices have no minimum load requirement and include remote ON/OFF, short cir. protection.
|
Extra wide input range (4.5–18 V, 9–36 V and 18–75 V), wide temperature range (-40 to +105º C) and high efficiency up to 82 percent. Housed in a SIP 8 package, no minimum load requirement, remote ON/OFF, short circuit and undervoltage protection.
|
With 80% efficiency, our 1 watt single and dual output DC-DC converter offers the options of 1000 Vdc or 3000 Vdc input/output isolation. The design also features 1-watt unregulated output power and a miniature single-inline package (SIP).
|
Low cost single-inline package
Our low cost 1-2 watt single and dual output DC-DC converter has tight regulation and a miniature single-inline package.
|
Regulated design, wide input voltage range. Our 2 watt single and dual DC-DC converter offers continuous short circuit protection and has low ripple and noise. This design also features an external on/off control and a SIP package of 0.86" x 0.36" x 0.44"
|
Our 3 watt single and dual output DC-DC converter with a 4:1 input voltage range provides continuous short circuit protection, a SIP package of 0.86" x 0.36" x 0.44" and 82% efficiency. This design also has an external on/off control and is RoHS compliant
|
High efficiency up to 83%, low ripple and noise and 3,000-Vdc input to output isolation. Miniature SIP package of 0.86 x 0.36 x 0.44 inches, ON/OFF control, low standby power and short circuit and overcurrent protection. Meets EN50155 and EN45545-2.
|
Compact and efficient design
Our low cost 0.75 watt single and dual output DC-DC converter is highly efficient with 500 Vdc input/output isolation and a miniature single-inline package.
|
Single- and dual- unregulated-output, 1-watt DC-DC converters designed for medical applications. Output voltages up to ±15 V and output currents up to 200 mA, high efficiency up to 81%, 4.2 KV AC/6 KV DC isolation.EN60601-1, ANSI/AAMI ES60601-1.
|
With a high performance pi input filter, our highly efficient and reliable 3 watt single and dual DC-DC converter has highly regulated isolated outputs, 100% burn-in, and no external components. Isolated, Regulated 24 Pin DIP Package.
|
With no external components, our 3 watt single output model of DC-DC converter has short circuit protection, a 2:1 wide input range and new 3.3 Vdc outputs. Dual output models are also available. Regulated 24 Pin DIP Package. Efficiency to 76% @ FL.
|
Our 3 watt 2:1 wide input TWA3/MHIA DC-DC converter features a clearance & creepage distance of 8 mm/2 MOPP, EMI class A filter & miniature DIP package. Also features reinforced insulation & operating temperatures between -40 & 105°C with derating.
|
DC-DC converters with internal SMD construction
Our customizable 0.5 to 1.0 watt single output DC-DC converter features a low profile, miniature DIP package, 1000 Vdc input/output isolation and internal SMD Construction.
| |
Product Reviews
|
|